序号 |
学生姓名 |
专业年级 |
指导教师 |
论文题目 |
刊物名称 |
发表时间 |
1 |
孟雪 |
纺材18 |
樊威 |
Recycling of denim fabric wastes into high-performance composites using the needle-punching nonwoven fabrication route |
Textile Research Journal |
2020 |
2 |
袁林佳 |
纺材17 |
樊威 |
Enhanced Mechanical and Electromagnetic Properties of Polymer Composite with 2.5D Novel Carbon/Quartz Fiber Core-Spun Yarn Woven Fabric |
Journal of Industrial Textiles |
2020 |
3 |
薛利利 |
纺材17 |
樊威 |
The influence of thermo-oxidative aging on the electromagnetic absorbing properties of 3D quasi-isotropic braided carbon/glass bismaleimide composite |
Polymer Degradation and Stability |
2019 |
4 |
李娟子 |
纺工17 |
樊威 |
Influence of Reinforcement Structures and Hybrid Types on Inter-Laminar Shear Performance of Carbon-Glass Hybrid Fibers/Bismaleimide Composites Under Long-Term Thermo-Oxidative Aging |
Polymers |
2019 |
5 |
党文生 |
纺材17 |
樊威 |
Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending load |
Materials & Design |
2019 |
6 |
董经经 |
纺工17 |
樊威 |
Fast and accurate bending modulus prediction of 3D woven composites via experimental modal analysis |
Polymer Testing |
2019 |
7 |
薛利利 |
纺材17 |
樊威 |
Enhancement of mechanical and electromagnetic absorbing properties of carbon/glass hybrid composites with a three-dimensional quasi-isotropic braided structure |
Textile Research Journal |
2019 |
8 |
王关林 |
纺工18 |
余灵婕 |
3D web reconstruction of a fibrous filter using sequential multi-focus images |
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES |
2019 |
9 |
李博宇 |
纺材17 |
刘呈坤 |
Controllable Aligned Nanofiber Hybrid Yarns with Enhanced Bioproperties for Tissue Engineering |
Macromolecular Materials and Engineering |
2019 |
10 |
杨梅 |
纺材17 |
孙润军 |
Preparation, characterization and kinetics study of chitosan/PVA electrospun nanofiber membranes for the adsorption of dye from water |
Journal of Polymer Engineering |
2019 |
11 |
涂莉 |
纺工17 |
孟家光 |
废旧毛_丝_棉混纺面料的组分分析及其剥色工艺 |
纺织学报 |
2019 |
12 |
张琳 |
纺工17 |
武海良 |
碱处理对异形截面聚酯纱线芯吸效应及强力的影响 |
纺织学报 |
2019 |
13 |
韩烨 |
纺工17 |
张辉 |
聚乙二醇对硫酸钛水热改性涤纶纤维光催化性能的影响 |
纺织学报 |
2019 |
14 |
杨静 |
纺工17 |
刘艳君 |
聚乙二醇对硫酸钛水热改性涤纶纤维光催化性能的影响 |
纺织学报 |
2019 |
15 |
吴梦婷 |
染整18 |
徐成书 |
线性聚醚嵌段氨基硅油的制备及其性能 |
纺织学报 |
2019 |
16 |
谭耀红 |
纺材16 |
刘呈坤 |
压电式纳米发电机及其混合器件的研究进展 |
材料工程 |
2019 |
17 |
袁林佳 |
纺材17 |
樊威 |
Enhanced mechanical and radar absorbing properties of carbon/glass fiber hybrid composites with unique 3D orthogonal structure |
Polymer Testing |
2018 |
18 |
田荟霞 |
纺材18 |
樊威 |
Enhanced interfacial adhesion of aramid fiber III reinforced epoxy composites via low temperature plasma treatment |
Polymer Testing |
2018 |
19 |
秦彩霞 |
纺工16 |
李龙 |
Comparison of the Structure and Properties of Wool and Cashmere Fibers under Potassium Permanganate Treatment |
FIBRES & TEXTILES in Eastern Europe |
2018 |
20 |
李 鑫 |
纺材16 |
张辉 |
Fabrication of magnetized polyester fabric grafted with -cyclodextrin for controlled release of menthol |
Journal of Industrial Textiles |
2018 |
21 |
薛海军 |
纺材16 |
张辉 |
The disappearance of photocatalytic propertiesof titanium dioxide nanoparticles formed on PET fabrics treated in a simultaneous hydrothermaldyeing process |
The Journal of The Textile Institute |
2018 |
22 |
谭耀红 |
纺工16 |
刘呈坤 |
静电纺制备定向纳米纤维集合体的研究现状 |
高分子材料科学与工程 |
2018 |
23 |
熊 锐 |
纺工14 |
武海良 |
中低温水溶季铵阳离子淀粉浆料的合成及其浆纱性能 |
纺织学报 |
2017 |
24 |
秦彩霞 |
纺工16 |
李龙 |
棉秆皮纤维素纤维的梳理与细化 |
纺织学报 |
2017 |
25 |
杨明杰 |
纺工14 |
沈艳琴 |
中低温条件下聚乳酸长丝的上浆机制 |
纺织学报 |
2017 |